We are foremost manufacturer of Bitumen Primer, which contrived using bitumen solution, and this solution can be used for sealing of prime porous and non-porous surface and also to protect the residential and commercial buildings. Our provided Chemical Resistant Bitumen Primer comprise bituminous air curing ready mixed acid as well as alkali resistant special primer that finds procedure on concrete surface and is made available in packaging of 25 liter drum. As bitumen primer is volatile in nature and also is slightly toxic solvent, it needs to be kept away from sparks and open flames at working areas.
| Features : |
|
| Storage Life : | 2 years |
| Temperature : | 30°C (+2°C) |
| Export Packing : | As per requirement of customer |
| Note : | Bitumen Primer has very Volatilt and Toxic Solvent. So Keep Away from Spark and Open Flames and also keep away from little Childerns. |
Backed with the rich industrial experience we are most important manufacturer of Phenomor Phenolic Resin Mortar. With the growing demand of the other chemicals considering the same we are concerned in manufacturing acid proof chemicals to serve our customers. Our provided Acid proof Bricks/Tiles lining work to resist against mineral acid. It has tremendous resistance against sulphuric acid and also used for tank lining, pickling, reaction, floor, drain lining as this is made under the direction of our chemical expert in accordance with the set industry standard, we also offer to customer at reasonable price.
| Features | It is widely used for Acid Resistant Bricks / Tiles lining as a bedding and jointing mortar for Chemical Reaction Vessels, Tanks, floor, Drain, Foundation etc. |
| Temperature | 175°C |
| Export Packing : | |
| Phenomor Resin | 25 Kg. Drum |
| Phenomor Powder | 25 Kg. Bag |
| Phenomor Mortar Resistant to | Concentrated H2SO4acid, Phospheric acid Non-oxidizing acids, Dilute Oxidizing acids, Solvents and Neutral Salts. |
Indochem Engineering Company is the brand name in manufacturing Sodium Silicate Mortar with high grade raw materials in fulfillment to the international standards. We are doing the quality test and make sure their efficiency before handing to the customers. Our provided Sodium Silicate Mortar are very skillful when applied for bedding or jointing bricks lining as well as bonding tanks, floor, vessel, chimney, effluent treatment plants and towers etc. The average mixing ratio necessary to obtain mortar with good working consistency is 1 pbw Resin & 3 pbw Powder. The ration will vary slightly depending upon temperature and working condition. Make sure that all the mortar is used from the mixing pan before another batch is prepared.
| Resistant : | Sodium Silicate Mortar are generally used in the range of PH range of 0-6 except when Sulphuric Acid exists in Vapor Phase Wet-Dry Exposures or available in Concentration more than 93% It also proofing from Oxidizing & Non-oxidizing Acids, & except Hydrofluoric Acid & Water. | ||||||||||||
| Resistant to Temperature : | 1000° C (Max.) | ||||||||||||
| Acid Curing : | For applying to the Resin type Mortar, the Bedding & Jointing Mortar is must same. If they are not same, first set Bedding Mortar properly, then adjusting Joints for time period of 72 hours with 20 to 25% HCL Acid. After doing this procedure, we should wash with clean water the remaining acid from joints. Then wait till Joints are completely dry. After these all processes, we can fit Resin Mortar in the Joints. | ||||||||||||
| Mechanical / Physical Property : |
| ||||||||||||
| Storage Life : | Solution :24 Months at Temperature 30°C (+2°C) Solution :24 Months at Temperature 30°C (+2°C) All components must be stored in Cool and Dry place under the roof until it is ready for use. | ||||||||||||
| Packing : | Solution :75 Kg. in M.S. Drum Powder :50 Kg. in Plastic Bag. | ||||||||||||
| Export Packing : | As per the requirements of Customer |
Leveraging over the skills of our qualified team of professionals, we are manufacturing and supplying the best resistance against acids our products are suitable for use in application area like repair, production, maintenance etc. Bitumen Mastic is Acid and Alkali resistant for use as a protective impervious membrane suitable for concrete, brick work, steel etc.
Bitumen Mastic has good resistance to large number of mildly corrosive conditions. Bitumen Mastic with crushed stone gravel or sand used for paving or roofing, to roof or coat with asphalt, is used at pave an area cover with material or concrete to make suitable for vehicle, for constructing roads in village and city. Bitumen mastic shall be broken into small piece and heated and then applied with wood or trowel. It is acid and alkali resistant for use as a protective impervious membrane suitable for brick work, concrete, steel etc.
Bitumen Mastic is used for concrete and ordinary red brick masonry with cement plaster surface are basic method for construction of floors, foundation, tanks etc. To protect commercial and civil structure of plants and building from corrosive attack acid resistant brick lining is mostly used, Bitumen Mastic has good resistance to weak, diluted acids, alkalis salts etc, also used as open mastic flooring for heavy duty flooring.
| How to Use : | We manufacture this Bitumen Mastic from small pieces and then apply heat to these small pieces. We also do Bitumen Primer of the surface on which this Bitumen Mastic applied. It also applied with straight edge piece on wooden and trowel surface. We must wait for drying this Bitumen Mastic almost 24 hours for take in use. Bitumen Mastic is only used in Concrete surface with the use of Bitumen Primer. It cannot use in very high heat, mineral oil and greases. |
| Storage Life : | Not Used at High Temperature |
| Packing : | 20 Kg. Cake (approx) |
Indochem Engineering Company is the brand name in manufacturing Cashewmor C.N.S.L Resin Mortar. Our provided Cashewmor C.N.S.L Resin Mortar is widely used for Acid Resistant Bricks/ tiles lining as bedding and jointing mortar. C.N.S.L Resin mortar is a special kind of mortar that is used for lining of acid proof bricks and tiles, its name is Cashew Nut Shell Liquid that is highly resistant to alkalis, acid in high temperature of upto 170 degree.
Cashewmor Resin Mortar is widely used for Acid Resistant Bricks/ Tiles lining as bedding and jointing mortar. It can be used for jointing Chemical Resistant Stoneware Pipes. It is also used for ETP Plants. It is suitable where excellent resistant property and heavy impacts subjected to the surface of floors and tank is required. Cashewmor mortar adheres strongly on the Ceramic, Concrete surface and metals so, it can be used as a monolithic lining for the construction of dilute acids storage tanks.
C.N.S.L Resin Mortar is used for lining, bedding, and jointing mortar for Acid Bricks and Tiles, also for joining chemical resistant stoneware pipes. It is also used for high resistance and heavy impact subject to the surface of floor. Also in ETP Plant that is strong on the ceramic, concrete surface and metals so it can be used as a colossal lining for the construction of thin Acids Storage Tanks. It has resistant to acids, alkalies and becomes self hardening due to its chemical reaction occurs when powder and resin is mixed.
| Resistant : | Resistant from Acids, Alkalies, Mixed Alkaline Solutions with Acids. |
| Resistant to Temperature : | 170° C (Max.) |
| Storage Life : | Solution : 12 Months at Temperature 30°C (+2°C) Solution : 6 Months at Temperature 30°C (+2°C) All components must be stored in Cool and Dry place under the roof until it is ready for use. |
| Packing : | Solution : 25 Kg. in M.S. Drum Powder : 25 Kg. in Plastic Bag. |
| Export Packing : | As per requirement of customer. |
We are the prominent manufacturers of Sulphomor Sulphur Mortar in India. The mortar should be heated at low temperature in a suitable Kettle by stirring with metal rod. The surface shall be laid first with covering. Over the dry coat of covering, the chemical resistant bricks or tiles are placed on spacer chips. Melted Sulphomor Mortar shall be poured through joints of bricks or tiles. In case of vertical surface joints of bricks or tiles are covered by applying with adhesive paper. Sulphomor Mortar is poured between the wall surface and the tile or bricks. Please make sure that no water shall be spilled over the bricks lining works before it completely cured.
It melts on heating not exceeding 93°C and has fluid consistency when it is hot and thus is very easily can be poured for cementing. It forms a very robust joint. It provides outstanding Chemical Resistance, especially to acidic materials regardless of its type and concentrations. It also offers excellent resistance to thermal shock. It offers superb resistance up to 90 °C. We offer our high quality and reliable Sulphur Mortarat affordable rates.
| Resistant : | High Resistive from Non-Oxidizing Acids, Dilute Oxidizing Acids & Netural Salts. | ||||||||||
| Resistant to Temperature : | 90° C (Max.) | ||||||||||
| Mechanical / Physical Property : |
| ||||||||||
| Note : | Sulphomor catches fire if it is over heated or having very tight cover. So we must ready with wet gunny bags for prevent from fire. This Sulphomor Mortar is burn wit very light blue flame. If in any case, fire produced, then immediate stops all heating process and also covered vessel with wet gunny bags. If mortar thickness gets the fire due to overheating, we should cool down and become it thin. We also take special care of water and damp mortar that they do not fall into heating vessel. | ||||||||||
| Storage Life : | 12 Months at Temperature 270C (+20C) | ||||||||||
| Packing : | Ingot : 50 Kg. Bag Powder : 50 Kg. Bag. | ||||||||||
| Export Packing : | As per customer’s requirement |
Indochem Engineering Company as a manufacturer we are also dealing to serve our client with different kinds of Acid Proof material and to satisfy industrial and customer requirement. We manufacture chemical substance under the supervision of chemical engineers and experts, to give you best product with better result. Furomor Furan Resin Mortar is chemical resistant mortar it is made when liquid resin and powder is mixed in proper proportion from effective mortor and after setting and curving gives a black solid mass, it is resistant to detergents, oils, acids, alkalies.
Our provided chemical is widely used for bedding lining and jointing mortar of tiles and bricks which gives resistance against chemicals, chemical reaction vessel, drain, foundation etc. Furomor Furan Resin Mortar is chemical based used in cement so chemical resisting cement with great resistance to a wide variety of cement of chemical compounds including oils, brines, solvent, acids, alkalis etc.
Furan Resin Mortar is acid resistant and is used for acid resistant bricks ,tiles mandana stones, where maximum chemical resistance is required such as dyestuff, petrochemicals, food, rayon ,steel, pharmaceuticals, fertilizer, power station etc and also used for acid resistance tank flooring, pipe jointing material for bedding lining and jointing of tiles and bricks .
| Resistant : | Proof from Non-Oxidizing Acids, Alkalies, Salt, Solvents, Greases, Detergents and Oils. Resist Hot & Highly Concentrated Alkalies, Hydrofloric Acid, Flourid Salted, We can use Carbon Filled Furomor Mortar. | ||||||||||||
| Resistant to Temperature : | 170° C (Max.) | ||||||||||||
| Mechanical/Physical Property : |
| ||||||||||||
| Storage Life : | Solution : 12 Months at Temperature 30°C (+2°C) Powder : 6 Months at Temperature 30°C (+2°C) All components must be stored in Cool and Dry place under the roof until it is ready for use. | ||||||||||||
| Packing : | Solution : 25 Kg. in M.S. Drum Powder : 25 Kg. in Plastic Bag. | ||||||||||||
| Export Packing : | As per requirement of customer. |
Leveraging the brand name in the industries of manufacturing Potassium Silimor Mortar, which is a special kind of mortar that is extremely resistant to acids, for this reason it finds applications as a jointing and bedding mortar in drains, floors, tanks, and foundations. Indochem Engineering Company is today one of the largest Potassium Silimor Mortar manufacturers in the country. This mortar is available as a two parts system consisting of a powder and a solution.
It melts on heating not exceeding 93°C and has fluid consistency when it is hot and thus is very easily can be poured for cementing. It forms a very robust joint. It provides outstanding Chemical Resistance, especially to acidic materials regardless of its type and concentrations. It also offers excellent resistance to thermal shock. It offers superb resistance up to 90 °C. We offer our high quality and reliable Sulphur Mortarat affordable rates.
| Resistant : | Potassium Silicate Mortar is highly resistive to Oxidizing & Non-oxidizing Acids, & Chlorine Gas. | ||||||||||||
| Resistant to Temperature : | 1000° C (Max.) | ||||||||||||
| Mechanical / Physical Property : |
| ||||||||||||
| Storage Life : | Solution :24 Months at Temperature 30°C (+2°C) Solution:24 Months at Temperature 30°C (+2°C) All components must be stored in Cool and Dry place under the roof until it is ready for use. | ||||||||||||
| Packing : | Solution :75 Kg. in M.S. Drum Powder :50 Kg. in Plastic Bag. | ||||||||||||
| Export packing | As per Customer’s Requirement. |
We are the foremost company in manufacturing and supplying Positector 200 Series. The Positector 200 Series is non-destructively measures a wide variety of applications using proven ultrasound technology. Measuring the coating thickness over wood, concrete, plastics, composites, metals and more. Advanced models measures upto 3 individual layer thickness in a multi-layer system and features a graphic readout for detailed analysis of the coating system.
Now available with both Standard or Advanced features and your choice of two measuring ranges, the updated PosiTector 200 is ideal for measuring coatings on cabinetry, furniture, flooring and more. New features include faster measuring speed, large impact-resistant display, IP5X ingress protection and protective rubber holster.
Positector 200 Series has ability of measures non-destructively different types of applications. It uses Ultrasound Technology for measuring them. It can measure the Thickness of Coating over Concrete, Wood, and Composite Materials. We can easily measure Single and Multiple Layers Coating Thickness on different types of items with the help of Positector 200 Series.
